1.1 The machine tool adopts the flat body and slant saddle construction: integral body and foot , the machine body is made by resin sand

1.2 Lathe bed was designed to be oil-water separation area, which can  isolate cooling water and lubricating oil, lubricating oil can be recycled.

1.3 Machine can finish line, arc, the inch thread, multiple thread processing, can apply to turning complicated shape and high accuracy requirement of disc, shaft parts processing.

1.5 Reliable gear box and lathe bed, solid, with good rigidity, vibration resistance, thermal resistance and convenient maintenance and adjustment.

1.6 Machine X, Z axis adopts two ball screw made in Taiwan and Japan NSK NTN)

1.7  The tailstock with built-in hydraulic sleeve structure, compact and reliable. Morse 5 center,  to press it tightly can adjust pressure

1.8 All lubricating points with mandatory automatic lubricating device, the fixed-point quantitative lubrication lead screw and guide rail, when there is abnormal state or oil shortage, the automatically generated warning signal.

1.9  Machine adopt Taiwan eight station hydraulic rotary turret , it can be forward and reverse rotation with nearest path , tool changing can be fast, good rigidity, high repeat positioning accuracy.

1.20 Clamping device: the main shaft with Taiwan 8 "standard non-through hole  hydraulic chuck (210 mm), non-through hole rotary oil cylinder (including non-return valve); Available pedal switch control of workpiece clamping, loosen

1.21Machine adopts totally closed protective device, to prevent the coolant, scrap iron splash, leakage outside the machine