G-CNC350 | |||||
ITEM |
Specification |
Standard accessories | |||
System |
CNC System |
GSK980TD or KND100T |
1. CNC System GSK980TDb 2. DA98b servo drive unit 3. Coolant system 4. Φ160 3-jaw chuck 5. water tank 6. spindle pulse encoder 7. manual pulse generator 8. special tool attached 9. automatic lubrication system 10. The integrate body and foot | ||
Equipped with spindle encoder and manual pulse generator | |||||
Operating range |
Max.Swing over bed (mm) |
φ400mm | |||
Max.cutting length of workpiece (mm) |
φ350mm | ||||
Max.manufacturing length of workpiece (mm) |
550mm | ||||
Spindle Nose |
C-6 | ||||
Spindle |
Spindle Thru-hole diameter |
φ52mm | |||
Spindle Speed |
66~2500 r/min | ||||
Spindle Motor |
Inverter motor ,5.5/7.5 kW(continue for 30minutes ) | ||||
Turret |
Type of turret |
Auto rotary turret | |||
Position of tool post |
Four | ||||
Size of tool bar |
20X20mm | ||||
Tail stock |
Max.travle of center sleeve |
130 | |||
Inside taper of center sleeve |
MT4 | ||||
The dia. of the center sleeve |
60mm |